|
Planet 8-Port 10/100Mbps Fast Ethernet + 2
Gigabit TP/ SFP combo/SGSD-1022P :: Detalle de Producto :: The PLANET SGSD-1022P PoE Switch features 802.3af Power over Ethernet (PoE)
function, which optimizes the installation and power management of network
devices such as wireless access points (AP), Voice over IP (VoIP) phones and
security video cameras. 802.3af PoE capabilities reduce installation costs of
add-in network productivity devices. It frees the wireless AP deployment from
restrictions of power outlet locations. With PoE features, power and data
switching are integrated into one unit and delivered over a single cable,
eliminating costs for additional AC wiring and reducing installation time.
The SGSD-1022P can be programmed for basic switch management functions such as
port speed configuration, Port aggregation, VLAN, Spanning Tree protocol, QoS,
bandwidth control and IGMP Snooping. It provides IEEE 802.1Q Tagged VLAN and the
VLAN groups allowed on the SGSD-1022P will be maximally up to 256. Via
aggregation of supporting port, the SGSD-1022P allows the operation of
high-speed trunk combining multiple ports. Maximum up to 8 ports can be assigned
for 12 trunk groups and it supports fail-over as well. • 802.3af Power over
Ethernet • 802.1Q VLAN • IGMP Snooping • 802.1s Multiple Spanning
Tree • Advanced QoS • SNMP and SNMP Trap • Access Control List •
802.1X Authentication / RADIUS • SSH / SSL
The PLANET SGSD-1022P is loaded with powerful traffic management and QoS
features to enhance services offered by Service Providers. The functionality
includes QoS features such as wire-speed Layer 4 traffic classifiers and
bandwidth limiting applications that are particular useful for multi-tenant
unit, multi business unit, Telco, or Network Service Provider. It also empowers
the enterprises to take full advantages of the limited network resources and
guarantees the best performance in VoIP and Video conferencing transmission.
The SGSD-1022P PoE Managed Switch supports IP stacking function that helps
network managers to easily configure up to 36 switches in the same series via
single IP address instead of connecting and setting each unit one by one. For
efficient management, the SGSD-1022P is equipped with console, WEB and SNMP
management interfaces. With its built-in Web-based management, the PLANET
SGSD-1022P offers an easy-to-use, platform-independent management and
configuration facility. It supports standard Simple Network Management Protocol
(SNMP) and can be managed via any standard-based management software. For
text-based management, the SGSD-1022P can be accessed via Telnet and the console
port. Moreover, the SGSD-1022P offers secure remote management by supporting SSL
and SSH connection which encrypt the packet content at each session.
Application
Providing up to 8 PoE, in-line power interface, the SGSD-1022P PoE Managed
Switch can easily build a power central-controlled IP phone system, IP Camera
system, or wireless AP group for the enterprises. For instance, 8 IP cameras or
APs can be easily installed in the company for surveillance demands or build a
wireless roaming environment in the office. Without the power-socket limitation,
the PoE Switch makes the installation of cameras or WLAN AP more easily and
efficiently.
With the business office expansion, the additional telephones required could be
installed in less cost via the implementation of PoE IP Telephony system than
that of the traditional circuit wiring telephony system. PLANET SGSD-1022P PoE
Managed Switch helps enterprises to create an integrated data, voice, and
powered network. PLANET 802.3af compliant IP Phones can be installed without the
need of an additional power cable because the power can be provided from the
standard Ethernet cable connecting to the SGSD-1022P. PoE IP Phones and Analog
Telephony Adapter work perfectly with the SGSD-1022P equipments which inject
power through the Ethernet cables. With SGSD-1022P, IP Telephony deployment
becomes more reliable and cost effective, which helps enterprises save
tremendous cost when upgrading from the traditional telephony to IP Telephony
communications infrastructure.

Physical Port • 8-Port
10/100Mbps Fast Ethernet ports • 2 10/100/1000Mbps TP and SFP shared combo
interfaces, SFP(Mini-GBIC) supports 100/1000 Dual mode • RS-232 DB9
console interface for basic management and setup
Power over Ethernet
• IEEE 802.3af Power over Ethernet compliant End-Span PSE • Up to 8
IEEE 802.3af devices powered • PoE Power up to 15.4 watts for each PoE
ports • Auto detect of powered device (PD) • Circuit protection prevents
power interference between ports • Remote power feeding up to 100m • PoE
Management –Total PoE power budget control –Pert port PoE function
enable/disable –PoE Port Power feeding priority –Per PoE port power
limit –PD classification detection
Layer 2 Features •
Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit
Ethernet standard • Supports Auto-negotiation and Full-Duplex /
Half-Duplex modes for all 10Base- T/100Base-TX and 1000Base-T ports. •
Auto-MDI/MDI-X detection for each RJ-45 port • Prevents packet loss Flow
Control: –IEEE 802.3x PAUSE frame Flow Control for Full-Duplex
mode –Back-Pressure Flow Control in Half-Duplex mode • High performance
of Store-and-Forward architecture, broadcast storm control and runt / CRC
filtering eliminate erroneous packets to optimize the network bandwidth • 8K
MAC address table, automatic source address learning and ageing • 2Mbit
embedded memory for packet buffers • Support VLANs –IEEE 802.1Q Tag-based
VLAN –IEEE 802.1v Protocol based VLAN –Q-in-Q tunneling –GVRP
protocol for VLAN Management –Private VLAN Edge (PVE) supported –Up to
255 VLANs groups, out of 4041 VLAN IDs • Supports Link Aggregation –Up to
5 Trunk groups –Up to 8 ports per trunk group with 1.6Gbps bandwidth (Full
Duplex mode) –IEEE 802.3ad LACP (Link Aggregation Control
Protocol) –Cisco ether-Channel (Static Trunk) • Supports Spanning Tree
Protocol –STP, IEEE 802.1D (Classic Spanning Tree Protocol) –RSTP, IEEE
802.1w (Rapid Spanning Tree Protocol) –MSTP, IEEE 802.1s (Multiple Spanning
Tree Protocol, spanning tree by VLAN) • Port Mirroring to monitor the
incoming or outgoing traffic on a particular port
Quality of
Service • 4 priority queues on all switch ports –Traffic
classification: –IEEE 802.1p CoS –IP TOS / DSCP / IP Precedence –IP
TCP / UDP port number • Strict priority and Weighted Round Robin (WRR) CoS
policies • Supports QoS and In / Out bandwidth control on each port •
Traffic-policing policies on the switch port • Voice VLAN Traffic
QoS
Multicast • Supports IGMP Snooping v1 and v2 • Querier
mode support • Multicast VLAN Registration (MVR)
Security •
IEEE 802.1x Port-Based / MAC-Based Authentication • Web Authentication •
RADIUS / TACACS+ users access authentication • IP-Based Access Control List
(ACL) • MAC-Based Access Control List (ACL) • Port
Security
Management • Switch Management Interface –Console
/ Telnet Command Line Interface –Web switch management –SNMP v1, v2c,
and v3 switch management –SSH v1/v2 switch management –SSL v3 switch
management • BOOTP and DHCP client for IP address assignment • Built-in
Trivial File Transfer Protocol (TFTP) client • Firmware upload / download via
TFTP • Configuration upload / download via TFTP • SNTP (Simple Network
Time Protocol) • Message / event / error / trap logs • Logging to local
file and syslog server • Private Enterprise MIB • Four RMON groups 1, 2,
3, 9 (history, statistics, alarms, and events) • Ping function • IP
Stacking management up to 36 units
| Model |
SGSD-1022P |
| Hardware
Specification |
| Copper Ports |
8 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports All ports with PoE Injector
function
|
| SFP/ mini-GBIC Slots |
2 1000Base-SX / LX / BX, shared with Port-9~Port-10, compatible with
100Base-FX SFP |
| Switch Architecture |
Store-and-Forward |
| Switch Fabric |
5.6Gbps / non-blocking |
| Switch Throughput |
4.16Mpps |
| Address Table |
8K entries |
| Share Data Buffer |
2 Mbits |
| Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex
|
| LED |
Power Link / Act and PoE In-Use per port
|
| Dimension ( W x D x H) |
330 x 155 x 43.5mm, 1U height |
| Weight |
1.59 kg |
| Power |
AC 100~240V, 50/60Hz |
| Power Supply |
Max. 130 watts / 443 BTU |
| Power over
Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type |
End-Span |
| PoE Power Output |
Per Port 48V DC, 350mA . Max. 15.4 watts |
| Power Pin Assignment |
1/2(+), 3/6(-) |
| PoE Power Budget |
110 Watts /375BTU |
| Layer 2
Function |
| Management Interface |
Console, Telnet, SSH, Web Browser, SSL, SNMPv1, v2c and v3 |
| Port Configuration |
Port disable / enable Auto-negotiation 10/100/1000Mbps full and half
duplex mode selection Flow Control disable / enable
|
| Port Status |
Display each port’s speed duplex mode, link status and Flow control status.
Auto negotiation status, trunk status. |
| VLAN |
IEEE 802.1Q Tag-based VLAN IEEE 802.1v Protocol based VLAN Q-in-Q
tunneling GARP / GVRP for VLAN Management Up to 255 VLANs groups, out of
4041 VLAN IDs Private VLAN Edge (PVE) supported
|
| Link Aggregation |
Supports 5 groups of 8-Port trunk, IEEE 802.3ad LACP
|
| QoS |
Traffic classification based on TCP/UDP Port Number, 802.1p priority,
DSCP/TOS/Precedence field in IP Packet |
| IGMP Snooping |
IGMP (v1/v2) Snooping, up to 256 multicast Groups |
| Access Control List |
IP-Based ACL / MAC-Based ACL In / Out direction per port Up to 32
rules per ACL
|
| SNMP MIBs |
RFC-1213 MIB-II RFC-2863 Interface MIB RFC-2665 EtherLike
MIB RFC-1493 Bridge MIB RFC-2674 Extended Bridge MIB RFC-2819 RMON MIB
(Group 1, 2, 3,9) RFC-2737 Entity MIB RFC-2618 RADIUS Client
MIB
|
| Standards
Conformance |
| Regulation Compliance |
FCC Part 15 Class A, CE |
| Standards Compliance |
IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-TX IEEE 802.3z: 1000Base-
SX/LX IEEE 802.3ab: 1000Base-T IEEE 802.3x: Flow Control and Back
pressure IEEE 802.3ad: Port trunk with LACP IEEE 802.1d: Spanning tree
protocol IEEE 802.1w: Rapid spanning tree protocol IEEE 802.1s: Multiple
Spanning tree protocol IEEE 802.1p: Class of service IEEE 802.1Q: VLAN
Tagging IEEE 802.1x: Port Authentication Network Control IEEE 802.3af:
Power over Ethernet, Powered Source Equipment |
| Environment
Specifications |
| Operating |
Temperature: 0 ~ 50 Degree C Relative Humidity: 20 ~ 95%
(non-condensing)
|
| Storage |
Temperature: -40 ~ 70 Degree C Relative Humidity: 20 ~ 95%
(non-condensing)
|
|