|
Planet Switch Layer 2/Layer 4 full managed
Gigabit/WGSW-48000 :: Detalle de Producto :: The PLANET WGSW-48000 is a Layer 2 / Layer 4 full managed Gigabit Switch that
provides high density performance and is rack mountable. With 96Gbps switching
fabric, the WGSW-48000 can handle extremely large amounts of data in a secure
topology linking to an enterprise backbone or high capacity servers. The
powerful QoS and Network Security features make WGSW-48000 to perform effective
data traffic control for both ISP and Enterprise VoIP, video streaming and
multicast applications.
 Physical Port
• 48-Port
10/100/1000Base-T Gigabit Ethernet RJ-45
• 4 mini-GBIC/SFP slots, shared with
Port-23, Port-24, Port-47 and Port-48
• RS-232 DB9 console interface for
Switch basic management and setup
Layer 2 Features
• Complies
with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit
Ethernet standard
• Supports Auto-negotiation and Half-Duplex /
Full-Duplex modes for all 10Base-
T/100Base-TX and 1000Base-T ports.
•
Auto-MDI/MDI-X detection on each RJ-45 port
• Prevents packet loss Flow
Control:
–IEEE 802.3x FAUSE Frame flow control for Full-Duplex
mode
–Back-Pressure Flow Control in Half-Duplex mode
• High performance
Store and Forward architecture, broadcast storm control, runt/CRC
filtering
eliminates erroneous packets to optimize the network bandwidth
• 8K MAC
address table, automatic source address learning and ageing
• 4Mbit embedded
memory for packet buffers
• Support VLAN
–IEEE 802.1Q Tag-based
VLAN
–GVRP for dynamic VLAN Management
–Up to 255 VLANs groups, out of
4041 VLAN IDs
–Private VLAN Edge (PVE) supported
–Management VLAN
•
Support Link Aggregation
–up to 14 trunk groups
–up to 8 ports per trunk
group with 1.6Gbps bandwidth (Full Duplex Mode)
–IEEE 802.3ad LACP (Link
Aggregation Control Protocol)
–Cisco ether-channel (Static Trunk)
•
Spanning Tree Protocol
–STP, IEEE 802.1D (Classic Spanning Tree
Protocol)
–RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
–MSTP, IEEE
802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
• Port
Mirroring to monitor the incoming or outgoing traffic on a particular port
(many to many)
Quality of Service
• 4 priority queues on
all switch ports
• Traffic classification:
–IEEE 802.1p CoS
–IP TOS /
DSCP / IP Precedence
–Port-Based QoS
• DSCP remarking based on ACL
•
Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS
and In/Out bandwidth control on each port
Multicast
• Support
IGMP Snooping v1 and v2
• IGMP Querier / IGMP Proxy / IGMP Immediately Leave
support
Security
• IEEE 802.1x Port-Based Authentication
•
Build-in RADIUS client to co-operate with the RADIUS servers
• TACACS+ login
users access authentication
• IP-Based Access Control List (ACL)
•
MAC-Based Access Control List
• Port Security
• Supports DHCP
Snooping
• Supports Dynamic ARP Inspection
• Supports IP Source Guard
•
Supports Auto Dos
Management
• Switch Management
Interface
–Console / Telnet Command Line Interface
–Web switch
management
–SNMP v1, v2c, and v3 switch management
–SSH / SSL secure
access
• DHCP client for IP address assignment
• Support DHCP relay
function
• Built-in Trivial File Transfer Protocol (TFTP) client
•
Firmware upload / download via TFTP or HTTP protocol
• Configuration upload /
download via TFTP or HTTP protocol
• SNTP (Simple Network Time Protocol)
•
Message / event/ error / SNMP Trap logs
• Logging to local file and syslog
server
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and
events)
• Supports Ping function
• Cable Diagnostic technology provides
the mechanism to detect and report potential
cabling issues, such as cable
opens, cable shorts, and etc. on Copper Links
• Link Layer Discovery Protocol
(LLDP)
• Management IP
• Power Saving ability for Green networking
|
